Feed aggregator

Having been faced with an empty beer fridge one too many times the team at Metalworks came up with an approval system for dispensing malted beverages. The trick was to remove the physical controls on a can dispenser. The only way you can get a cold one is to ask the machine via its twitter account. If there’s beer inside, it waits for one of your approved co-workers to give the go-ahead.

There are two versions of the machine. The first is a hacked refrigerator with a dispenser hole cut in the door. This resides in their Sydney office, apparently doesn’t work all that well, and is only shown in the video after the break.

The image above is version 2.0 which is located at their Singapore branch. It’s a much smaller device, but works very well since it started as a commercially available can dispenser. You can see the Arduino Leonardo and breadboard which make up the driver circuits.

There aren’t a ton of details on this, but it’s not hard to find about a million examples of an Arduino using Twitter. Here’s one that takes Morse code as an input and posts the message as a Tweet.

Filed under: beer hacks

This past summer when we were putting together our Ultimate Guide to 3D Printing we sought to test a representative sample of available consumer-class 3D printers. Given the dynamic nature of the market, we were sure many new printers would start popping up. And that's definitely what's happening. So it's cool to see Endgadget has come out with its own 3D printer buyer's guide: The Shape of Things to Come.

Read the full article on MAKE

This television is perfect except for its low resolution and the fact that it can’t be seen by the naked eye. [Chris Shen's] art installation, Infra, uses 625 television remotes as pixels for a TV screen. There’s a little bit of insight to be gained from the details which [Chris] shared with EMSL.

The remote controls were all throw-aways. Even if there are problems with the buttons, battery connectors, or cases, chances are the IR led in each was still functional. So [Chris] patched into them using about 500 meters of speaker wire.

Why 625 pixel? Because that’s how many LEDs the Peggy board can handle. We’ve seen this open source LED board driving video in other projects. Here it’s been connected to each remote using Molex connectors. Each of the headers has the same pitch as a through-hole 5mm LED. The entire board was filled with them, and a mating crimp connector terminates the end of the wire coming out of each remote. This makes setup quite easy as the remotes don’t have to be installed in any particular order as long as the physical location matches Peggy’s grid.

You can get a glimpse of the piece playing video in the clip after the break.

[via Reddit]

Filed under: led hacks

The folks at Photojojo just posted a neat low-tech tutorial on how to make a projector for your mobile phone using a shoebox, a paperclip, and a magnifying glass. MacGyver would be proud. They were able to find the magnifying glass at a dollar store for, well, a dollar (so [...]

With this Optical Tremolo Box you are hearing are patterns of light, created by a spinning disk translated into rapid electrical fluctuations to produce a warbling audio effect. Audio enters the circuit via the input jack, passes through the variable resistor — the light-sensitive photocell — and outputs to the amplifier, creating the effect known as tremolo.

Read the full article on MAKE

With all the microcontrollers and single board computers on the market, sometimes it's hard to see all your options. That's why we made up this quick reference sheet for the 8 most popular boards we sell in the Maker Shed.

Read the full article on MAKE

Jason Allemann, who created these Lego mazes last year, built this beautiful and elegant Lego ball clock. The video shows how the rail system works with one ball being hauled up the chain every minute, then tipping the balance once enough balls have accumulated. [via Brothers Brick]Filed under: Fun & [...]

Read the full article on MAKE

[Mal'oo] has one of those laptop computers whose screen swivels to turn it into a tablet. But the thing is a few years old and didn’t come with an orientation sensor that changes the screen between landscape and desktop, but also knows which side is up. His solution was to add a 12-axis sensor via the mini PCI express header.

The hardware comes in two pieces. The first is a mini-PCIe card to USB interface. This is handy if you want to add a Bluetooth dongle permanently to your computer. But he’s got other things in mind for it. After hacking the BIOS (which for some reason limits what you can plug into this slot) he moved onto the second part which is a USB 12-axis sensor. This picture shows the wires before they were soldered to the USB card. [Mal'oo] couldn’t just plug it in because the sensor wouldn’t have been oriented correctly in relation to the computer. The final product is quite response, as shown in the clip after the jump.

Filed under: laptops hacks

If you’re old enough to have used a dial-up modem we’d bet you can do an imitation of the sounds it made while connecting. Those not-so-beautiful sounds heralded the dawning of a technological era. But few actually know what each of those distinct sounds were doing. Now’s your chance to learn. This post explains each step in the dail-up handshake process.

This may be the most useful infographic we’ve ever seen. Normally we just seem them as gimmicks, but [Oona Räisänen] really put together something special with this one. Her blog post includes an audio clip so that you can play back the full handshake sounds. The main box on the graphic shows the audio spectrum from that clip, with an explanation below it. But you’ll also want to read through her full write-up for a more narrative description.

The part we found the most interesting is that these modems needed to disable the echo suppression used by the telephone system in order to operate at full-duplex. Apparently land lines disabled the speaker while you were talking so that you didn’t hear your own voice. This was a problem if the modem was trying to send and receive at the same time.

[via Reddit]

Filed under: classic hacks

Last year I posted this super cool wire-bending CNC. D.I.Wire Bender is a rapid prototype machine that bends metal wire to produce 2D and 3D shapes, pushing the limits of what can be produced in different materials, forms, and methods, anywhere from a model shop to your home. The creators [...]

Read the full article on MAKE

[Reza's] methodical investigation of this remote controlled outlet let him patch in with an Arduino using a 433 MHz transmitter. This is a single-device unit, but the techniques used here should allow you to take control of wireless rigs that have multiple modules to control many devices.

We’ve seen some folks at our local hackerspace try to patch into the remote control itself. That used some type of weird button scanning (not just connecting a pin to ground or voltage) and didn’t pan out. [Reza] doesn’t even crack open the case of either of the units seen above. Instead, he goes straight for a wireless receiver he had on hand, using a logic analyzer to capture the signals coming from the remote.

Once he had a good snapshot of the signals sent when pressing the on or off button of the remote he set out to replicate it in his Arduino code. His function called setStateWithDelay takes three parameters: the transmit pin, the level (high or low), and a number of milliseconds to delay. Each signal calls this function many times, but working the bugs out is pretty easy; just capture the signal with the logic sniffer and compare to the stock remote.

Filed under: arduino hacks

The Belkin WeMo is a small, WiFi connected outlet controlled by a mobile device that adds Internet control to a desk lamp, coffee maker, or, if you’re feeling daring, your home server. It’s an interesting device, but of course there are a few security implications of having your electric kettle connected to the Internet. [Daniel] was able to get root on his Belkin WeMo and with full control of his Internet-connected outlet was able to turn it into a deathtrap.

[Daniel] says his exploit could be developed into a virus that will scan for WeMo devices. Once these Internet-connected devices are found, it’s easy to turn these devices on and off really fast; something not too dangerous for a desk lamp, but potentially lethal if it’s plugged into a space heater.

In the video after the break, you can see [Daniel] exploiting the WeMo with a flaw in its UPnP implementation. There’s footage of his terminal hacking and of his desk lamp being turned on and off really fast, something that could be very dangerous for higher current devices.

Filed under: peripherals hacks, security hacks

Like Cyrano giving advice to Christian from underneath Roxanne’s balcony, now you too can can advise young suitors trying to win the heart of the object of their affection.

[Lauren] had the idea of using objective, third-party observers checking in on her dating activities and giving advice as to what she should do next. Yes, she’s streaming her dates over the Internet and asking for advice from Mechanical Turk workers.

The idea behind this project isn’t that [Lauren] isn’t looking for advice from her own Cyrano, but rather to open up new, previously unexpected possibilities. Turk workers will watch the stream while [Lauren] presents them with options telling her to smile more, laugh, change the subject, or ask a question. [Lauren] receives these results as a text message, where she’ll comply with the Internet’s wishes and hope her date doesn’t go horribly awry.

It’s an interesting project to say the least, but we’ve got to wonder about the quality of the advice given from her online advisers. Turk workers do take their jobs more seriously than random people on the Internet, so barring an invasion from /b/, [Lauren]‘s night might just go alright.

Filed under: lifehacks

[Blake] just finished a gas sensor suite built from Gadgeteer parts. The three sensors are the cylindrical towers along the left hand side of the assembly. The one at the top (with the orange ring) is an alcohol sensor. The middle one senses ammonia and the lower sensor measures air quality. Also rolled into the mix are temperature and humidity sensors.

You can collect a lot of data with this type of setup. To keep it organized [Blake] used the ThingSpeak interface. Using the NIC in the upper right he uploads the measurements for real-time graphing. The setup is explained in detail in the video after the break, including a test with some cleaning ammonia.

We haven’t tried out the Gadgeteer system for ourselves yet. But you’ve got to admit that the ribbon cable connector system the family of parts uses really helps to keep a rather complicated setup like this one nice and tidy.

Filed under: Microcontrollers

Sure, the physical build itself looks great, but it’s what [Michael] did with the firmware that impresses us the most. He’s using an Arduino Mega to drive the 7x7x7 cube and manages to squeeze out what he calls 142 frames per second with the setup. We’re not sure FPS is the right measurement, as we believe it’s the multiplexing rate that he’s trying to describle. It takes 144 uS to scan the entire matrix once. He performs the scan seven times per frame and the result is a flicker-free appearance, even to cameras.

You can see a video demonstration after the break. Since [Michael] emailed us directly with more details about the build we’ve pasted those below the fold as well.

If you’re looking for a more entry-level Arduino LED cube this 4x4x4 project is just the thing.

The cube is able to process 142 frames per second, that is, 1 frame every 7 milliseconds. Within this time period, it loops through a still frame 7 times (Each cycle of POV lasts 144 microseconds). This is able to compensate for flickering during video recording, allowing all camera’s to record fluid video without distortion.

The cube itself is controlled with an Arduino Mega 2560. For each frame in memory, the Arduino reads and bit shifts 49 bytes of data for an encoded duration. This allows for the cube to be applied to a variety of purposes, from text display to effects to music visualisation.

The frames were generated through complex Processing scripts, allowing for a multitude of operations such as shifting in any direction (seen in the rain effect), and an edge shift (seen in the scrolling text around the outside of the cube). These scripts were used to perform the basis of calculations for fireworks, as well as sine waves in 1, 2 & 3 dimensions (seen in the video).

In this cube the supporting structure was made 0.9 mm galvanised steel wire, straightened by stretching the wire. The 5mm Blue LED’s are positioned 30mm apart, with the anodes being attached to the verticals (white wires in the image below) & the cathodes are attached to the horizontal layers (green wires in the image below – bottom right – shown passing through NPN transistors). The Arduino Mega 2560 R3 is positioned on a suspended platform, with the anodes controlled on the Digital Pins as opposed to the cathodes on remapped AnalogInputs.

Filed under: arduino hacks, led hacks

What can you do with ten buttons and ten lights? A lot.

[Andrew] and [Nathan] found a collection of Hale Research keypads being thrown out, and decided to host the Keypad Contest. The goal of the contest was to create something nifty using the ten buttons and ten lights on the keypad, and an ATtiny2313 that replaced the original 8051-compatible microcontroller in the device.

[Andrew] wanted to try making PCBs with his home-built CNC machine, so he milled out USBtinyISP programmers for the ATtiny2313. Then he gave out eleven development kits to a group, and explained how to develop on the hardware.

After a month of hacking, seven people completed projects. The winner was an internet radio controller, which had the keypad sending serial data to a TP-Link WR703N router. The router used a USB sound card and OpenWRT firmware to stream music. The runner up was a timing game called “Capture”.

The contest write up has details on all seven projects. [Andrew] and [Nathan] were successful in getting software engineers to try hardware with this contest, resulting in some neat hacks. After the break, check out a video demo of the internet radio controller.

Filed under: contests, Microcontrollers

Readers Hauke and Jakub write in with their experience building the MonoBox Powered Speaker. Hauke built his into a stained teabox with modded pot and LED; Jakub built a stereo version into a treasure chest with an illuminated switch and also cleverly hides the audio player.

Read the full article on MAKE

MAKE's Hardware Innovation Workshop and Maker Faire New York were among the finalists in different categories for the FAME awards. FAME recognizes magazine industry special events.

Read the full article on MAKE

Two thousand and twelve was 3D printing’s breakout year. While still the realm of early adopters, the 3D printing genie is clearly out of the bottle. I checked in with several consumer-class 3D printer companies to see how 2012 went down and to get their thoughts on 2013 and beyond. Everyone I spoke with was extremely bullish about the future of 3D printing and some were already rolling out new models.

Read the full article on MAKE

Is it too soon to start early birding tickets to the Greatest Show (and Tell) On Earth, Maker Faire Bay Area? Definitely not. Between now and March 14th you can buy discounted Maker Faire tickets–but prices go up March 15th.Filed under: General

Read the full article on MAKE